Internet Table Talk
Samsung

Resolve Samsung TV Won’t Turn On Issue With These Amazing Methods

Is your Samsung TV not turning on? Do not get panicked if you are encountering this issue. We have received many complaints about the same problem as it has been faced by a huge number of users.

There are multiple reasons due to which your Samsung TV not turning on. In case, if the TV remote gets damaged, then there is a chance of facing this issue. If the motherboard itself has any defect, then this can lead to this problem as well.

Apart from that, if the cable box, HDMI cable or the COAX cable is not working properly, then your Samsung TV won’t turn on as well. Moreover, damaged LED, power supply related problems are equally responsible for getting this problem.

Unfortunately, if you are also facing the same problem, then this is the perfect place that you can rely upon to overcome this issue. Follow the entire article thoroughly and implement the methods exactly the same as stated below.

Troubleshooting Methods to Solve Samsung TV won’t Turn on Blinking Red Light Issue:

Follow the instructions as mentioned below. Do not make any mistakes while executing the methods.

Solution 1: Power Cycle your TV

As power cycling is a helpful method, it can solve the Samsung Plasma TV won’t turn on issue without any trouble. 

So, keep following the methods and check if the issue gets resolved after performing the solution or not.

The first and foremost thing you have to do is to disconnect your Samsung TV’s power cord from the power supply. Then keep it aside for a few minutes. 

After that, tap on and hold down the power button of the TV for almost about fifteen to twenty seconds.

Now, release the button and then turn on the power as usual.

Solution 2: Update the Software

If the first method is not helpful for you, then you can go through this one. By updating the software, you can easily get rid of the Samsung Smart TV won’t turn on issue. Because due to the outdated software, it is quite possible that your TV might not turn on.

First of all, you need to insert the updated USB cable and then move to the Menu option. After that, choose the Support option and then tap on the Software Update.

At the final step, click on the Update Now button and keep waiting until the updating procedure is going on. Once done, then check if your Samsung TV is turning on or not.

Solution 3: Check the Cables 

The cables might need to be reseated to overcome this particular issue. Sometimes, dirt gets in the connections causing some resistance and as a result, your Samsung TV stops working leaving you tensed.

At such instances, you have to disconnect all the cables and check minutely to identify the faulty one. After identifying it, reconnect the cables and if needed, then replace them with a new one. 

Finally, check if Samsung TV won’t turn on issue gets resolved or not.

Solution 4: Check the Capacitors

You can fix this problem by replacing the capacitors with higher voltage capacitors. You need to have good soldering skills to do this on your own.

Else, you could also find a replacement power supply board somewhere. But if you are not a tech-savvy person, then doing it on your own will be quite risky.

Solution 5: Check the Motherboard

When all the above-mentioned solutions fail to resolve the problem, then the only solution is to replace the motherboard with a new one. But we suggest you not to replace it on your own.

As motherboard plays a major role, hence if it is not set properly, then your TV might get damaged severely. So, if you are not a tech-savvy person, then seek help for an expert.

Final Recommendations

In the above article, we have discussed briefly on how to solve Samsung TV won’t turn on issue. Moreover, you also get an idea of the problem-causing factors and some feasible ideas to solve the issue.

But in case, if you are unable to understand any step, then it will be better for you to consult with a technician for professional guidance.

We recommend you to leave your feedback if the article is beneficial for you. Keep following our website for more tech-related solutions.

Related posts

Learn How To Fix The IMS Service Has Stopped On Samsung Galaxy J3

Nathaniel J. Villa

Brilliant Hacks To Resolve Samsung Tablet Won’t Charge Issue In No Time

Nathaniel J. Villa

Resolve Samsung Printer Error Code 11 1112 With The Help Of Expert Methods

Nathaniel J. Villa

Leave a Comment

+ 16 = seventeen