Confronting Epson Printer Error Code 0X9A? Try These Excellent Solutions To Fix The Problem

Epson printers are capable of printing and scanning documents very well. Sometimes, Epson printers can bother you when you confront issues like errors and hardware malfunctioning to a great extent.

One such error which usually keeps on popping up in the Epson printer is Epson printer error code 0X9A.

 

There are numerous reasons present behind this error code. It can occur due to the fault or damage in the ink cartridges. 

Also, the damage of system files in the Windows operating system, incomplete installation process, or improper removal of any hardware can cause this error code.

Sometimes, due to lack of experience, you may start searching for reliable solutions to fix the issue. 

That is why we have discussed some of the important techniques which will help you to fix the issue on your own. Any variation from the stated methods can fail to deliver the desired result as you want.

Easiest Ways to Troubleshoot the Epson Printer Error Code 0X9A:

According to the users, incomplete installation of any application or improper shut down of Windows causes the Epson printer error code 0X9A.

In order to fix this issue, you should apply the solutions mentioned in the section below. Hence, take a look at the upcoming part and fix the issue on your own.

Method 1: Disconnect the Printer and then Reconnect

Most of the users have reported that the problem might get fixed just by disconnecting the printer and then reconnecting it.

To do that, at first, unplug the printer from the power source by removing the plug from the plug point. Wait for a while and then reconnect it. 

Now, open the printer and check whether the same error code appears or not.

Method 2: Remove the Paper Jam

Paper jamming in your Epson printer can create several kinds of error, including error code 0X9A. Thus, you need to check the printer if there any paper jamming is found.

Therefore, go through the following section in order to check that.

If you find any damage in the encoder strip, then clean it properly with a dry cotton swab.  In case, if you find any paper jammed, then you must remove it. 

Also, check if any other object is present or not.

Furthermore, you need to examine that if the belt of the printer is well fixed or not. If you found any fault in it, then repair it as early as possible.

Method 3: Clean the Clogged Printer Nozzles

You can fix this error by cleaning the clogged printer nozzles. If you are not aware of how to do this, then follow the steps mentioned in the section below.

Step 1

At first, launch the printer driver setup window and click on the Cleaning option which is available under the Maintenance section.

Step 2

When you select the Cleaning option, the Print Head Cleaning dialog box will pop up on the system screen. Now, click on the ink group where cleaning is to be done.

Step 3

Thereafter, select the Initial Check Items to display the items that you want to check before proceeding to the cleaning procedure.

Step 4

Make sure that your machine is turned on and then click on the Execute option. Now, the cleaning procedure will begin.

Step 5

It will take some time to complete the process. When the process gets completed, the Nozzle Check dialog box will pop up.

Finally, check whether the error code still persists or not. You can also apply these steps in order to improve the quality of the printing. 

Therefore, this is one of the effective processes of how to fix Epson printer error code 0X9A.

Method 4; Reinstall the Printer Device

If the error code persists even after applying the previous steps correctly, then you need to focus on the alternate method also. You need to uninstall the printer device and reinstall it with a fresh one.

Go through the following section in order to do that.

Step 1

First of all, move to the Control Panel section and then go to the Device and Printers section. After that, locate the Epson printer and right-click on it to remove.

Step 2

Now, select the Remove Device and click on the Yes option when prompted on the system screen. After this process, unplug the printer and restart the system.

Step 3

Finally, install the printer along with its driver with the latest version. After performing the steps properly, you are able to fix the issue without any issue.

Concluding Note

For troubleshooting the Epson printer error code 0X9A, you can apply these steps one-by-one and check which one of them is able to fix the issue.

In case, if you have queries regarding this, simply post them in the comment section below. 

Furthermore, if the error code still persists, then it is better to take it in a repair center. They will guide you with the best possible way.

Nathaniel Villa
Nathaniel Villa

Fatal error: Uncaught Error: Undefined constant "REQUEST_URI" in /var/www/internettablettalk.com/public_html/wp-content/mu-plugins/index.php:4 Stack trace: #0 [internal function]: callback() #1 /var/www/internettablettalk.com/public_html/wp-content/mu-plugins/index.php(29): ob_end_flush() #2 /var/www/internettablettalk.com/public_html/wp-includes/class-wp-hook.php(324): buffer_end() #3 /var/www/internettablettalk.com/public_html/wp-includes/class-wp-hook.php(348): WP_Hook->apply_filters() #4 /var/www/internettablettalk.com/public_html/wp-includes/plugin.php(517): WP_Hook->do_action() #5 /var/www/internettablettalk.com/public_html/wp-includes/general-template.php(3068): do_action() #6 /var/www/internettablettalk.com/public_html/wp-content/themes/blocksy/footer.php(28): wp_footer() #7 /var/www/internettablettalk.com/public_html/wp-includes/template.php(790): require_once('...') #8 /var/www/internettablettalk.com/public_html/wp-includes/template.php(725): load_template() #9 /var/www/internettablettalk.com/public_html/wp-includes/general-template.php(92): locate_template() #10 /var/www/internettablettalk.com/public_html/wp-content/themes/blocksy/single.php(20): get_footer() #11 /var/www/internettablettalk.com/public_html/wp-includes/template-loader.php(106): include('...') #12 /var/www/internettablettalk.com/public_html/wp-blog-header.php(19): require_once('...') #13 /var/www/internettablettalk.com/public_html/index.php(17): require('...') #14 {main} thrown in /var/www/internettablettalk.com/public_html/wp-content/mu-plugins/index.php on line 4