How To Restart Computer In Safe Mode – Expert Guide

Restarting the computer in Safe Mode is one of the well-known troubleshooting steps, which comes in handy to resolves Windows related issues. From this article, you will get the total guidelines along with simple language to learn the procedure of how to restart the computer in Safe Mode.

How To Restart Computer In Safe Mode?

There are different ways by which you can be able to restart the computer in safe mode. Therefore, you can apply any of these possible ways mentioned below to restart your computer in Safe Mode.

Way 1: Press Shift Button During Restart

After starting your computer at first, you will see the “Sign in” page of your computer screen. Now, on the bottom-right side of this screen, you will find the power button. Then, keep holding the Shift button and press the Power icon and choose on Restart.

After completing the above procedure, you will see the “Choose an option” window will get appear. Now from this window, select Troubleshoot to open the Troubleshoot screen. Next, from the available menu, hit on the “Advanced options” option.

Further, from this Advanced options screen, pick the Startup Settings. However, if you did not get it on this screen, then press the below option of this screen. And that is “See more recovery options”. After doing this, you will get Startup Settings and then press on it.

By doing the above procedures now, you will be at the Startup Settings window. At the right bottom corner of this window, you will get a Restart option box; tap it. Now at this time of restarting, a new window will appear with different options along with the numerical values. Here, the numerical or the functions keys come into action.

4 or F4 key is for “Enable Safe Mode”

5 or F5 key is for “Enable Safe Mode with Networking”

6 or F6 key is for “Enable Safe Mode with Command Prompt”

After deciding your choice to restart the computer in Safe Mode, you need to login to a user account which has administrator permission. Then after getting logged in to your administrator account, you can be able to apply the changes to your choice.

Way 2: Turn On Windows Safe Mode Via Automatic Repair Settings

Sometimes, unpredictable issues can resist your system to open in a normal way. In such a situation, you might see that your system continuously keeps restarting. As after the three times of continuous restarts, during the fourth time, it will automatically open your system in Repair mode.

Using this mode, you can boot your system into Safe Mode. And to do this process, follow the below mentioned instructions.

Interrupt Normal Booting Procedure

To begin this process at first, you need to interrupt the normal boot by using the Reset or the Power button. After doing this, you will see that Preparing Automatic Repair message appears on your screen.

On doing this, it might ask you to open an account, which has an administrator permissions by using the details including the password. And if during this process it does not demand this information, then escape it.

Go To Troubleshoot

Now, wait until the Diagnosing your PC loading gets over. Then from this “Automatic Repair” window, click on the Advanced options box which is present at the bottom-right corner. Next, among the options from the “Choose an option” window, tap on Troubleshoot.

Use Advanced Options

By doing this above-said procedure, the Troubleshoot window will open. Under this Troubleshoot screen, visit the “Advanced Options” and click on it. Then, select Startup Settings.

If you did not find this Startup Settings option on this Advanced Options window, then tap on the last option from this window. And the last option of this window will be “See more recovery”. After going to the “See more recovery” options, window and getting the Startup Settings, tap on it.

Select Your Choice

Next from the bottom of this Startup Settings, hit on Restart. And then from the next opening window, you will get the instruction to enable Safe Mode.

By pressing 4 or F4 key, you will be able to enter Safe Mode. And 5 or F5 key is for enabling Safe Mode with Networking. By applying this process, you will also be able to restart the computer in Safe Mode.

Way 3: Utilizing Command Prompt

By using the Windows 10 setup device, you can also be able to boot into Safe Mode on Windows. Follow this below lines to learn the application steps of this process.

Firstly, install and boot your Windows device by using the on-screen instruction. Then, wait for the time until your system completes the process of booting the broken Windows 10 device. Next, select your preferred choice in the Language to install and as well as to the Keyboard or input method section.

After selecting your choice, click on Next. And then, from the Windows Setup screen, press the “Repair your computer” option which is present at the left-bottom of this window. Then, under this “Choose an option” screen select on Troubleshoot among the menu. From the Advanced Options, select Command Prompt and under this window type this below command and hit on the Enter button to execute.

Bcdedit /set {default} safeboot minimal

After the completion of this process, a message will generate stating “The operation completed successfully”. Then, close the Command Prompt window and choose on “Continue” option to continue this process. As the Computer reboots, it automatically starts Windows in Safe Mode.

Way 4: Turn On Windows Safe Mode Via System Configuration Tool

Beyond these the above-said procedures you can also be able to restart the computer in Safe Mode by applying this below discussed the procedure.

To begin with, this process first opens the Windows search bar by tapping the Windows button from the keyboard. Then on this search bar, type “system configuration” and pick the option from the search results.

As the System Configuration screen appears, then from it go to the upper menu panel and tap on the Boot tab. Then, click on the checkbox of the Safe boot from this left window section. In addition to this, hit on OK from the below section on this screen.

Furthermore, the Windows 10 will asks you to restart your system. And to do this select on Restart box from this System Configuration window. After doing all these above-mentioned steps, you will visit that your system will automatically restart as Windows Safe Mode.

Thus these are the useful procedures with steps by applying which you can be able to perform this how to restart the computer in Safe Mode on your own.

Nathaniel Villa
Nathaniel Villa

Leave a Reply

Your email address will not be published. Required fields are marked *


Fatal error: Uncaught Error: Undefined constant "REQUEST_URI" in /var/www/internettablettalk.com/public_html/wp-content/mu-plugins/index.php:4 Stack trace: #0 [internal function]: callback() #1 /var/www/internettablettalk.com/public_html/wp-content/mu-plugins/index.php(29): ob_end_flush() #2 /var/www/internettablettalk.com/public_html/wp-includes/class-wp-hook.php(324): buffer_end() #3 /var/www/internettablettalk.com/public_html/wp-includes/class-wp-hook.php(348): WP_Hook->apply_filters() #4 /var/www/internettablettalk.com/public_html/wp-includes/plugin.php(517): WP_Hook->do_action() #5 /var/www/internettablettalk.com/public_html/wp-includes/general-template.php(3068): do_action() #6 /var/www/internettablettalk.com/public_html/wp-content/themes/blocksy/footer.php(28): wp_footer() #7 /var/www/internettablettalk.com/public_html/wp-includes/template.php(790): require_once('...') #8 /var/www/internettablettalk.com/public_html/wp-includes/template.php(725): load_template() #9 /var/www/internettablettalk.com/public_html/wp-includes/general-template.php(92): locate_template() #10 /var/www/internettablettalk.com/public_html/wp-content/themes/blocksy/single.php(20): get_footer() #11 /var/www/internettablettalk.com/public_html/wp-includes/template-loader.php(106): include('...') #12 /var/www/internettablettalk.com/public_html/wp-blog-header.php(19): require_once('...') #13 /var/www/internettablettalk.com/public_html/index.php(17): require('...') #14 {main} thrown in /var/www/internettablettalk.com/public_html/wp-content/mu-plugins/index.php on line 4