Internet Tablet Talk
Windows

2 Quick And Easy Ways To Fix Windows 10 Update Error Code 0xc1900200

Windows 10 is extremely renowned for the exclusive features that it holds. But, this too is vulnerable to malfunctioning and damages just like any other Operating Software. And when troublesome error codes appear, the users become perplexed and immediately seek solutions. Such problems put a halt to the otherwise smooth workflow of the users. One of the common complication that the system indicates is the error code 0xc1900200.

The error signifies problem during the Windows update process. It arises due to some complication in the process of installation which indicates an incompatibility with the Operating Software. The problem points out the fact that the device isn’t compatible enough for the proper downloading of the updates. Now, this indicates that the available RAM or the CPU speed is not sufficient for the update.

When this issue arises, users tend to search for immediate and easy solutions. But, prior to that, it is essential to know what the error indicates and the causes of its manifestation. However, this article is determined to solve the problem comprehensively with no hassle. Therefore, read along and use this guide for resolving it.

The Probable Causes of the Error Code 0xc1900200

Now that you know the error is associated with the Windows update procedure, proceed towards the possible reasons for which the error occurs. The problem, as said earlier, signifies a conflict between the Operating Software and the drivers.

Furthermore, it points out the fact that the system does not possess the basic requirements for initiating the download process. But, you cannot proceed without knowing the root causes of the issue which you want to amend.

  • The error code 0xc1900200 manifests due to the presence of damaged Windows files.
  • Also, incomplete installation or the improper deletion of certain software trigger this issue to appear.
  • Apart from that, if the system has recovered from a malware invasion, the error code appears to make its presence known.
  • Improper shutdown can also lead to bringing up the error.

These are the probable causes which trigger the problem and stirs confusion among users. Furthermore, it also hinders the smooth functioning of the regular tasks. However, now that you know the reasons for the sudden appearance of the error code 0xc1900200, make sure to head to the solutions for troubleshooting it entirely.

Troubleshoot Windows 10 Update Error 0xc1900200

The solutions which we have mentioned underneath are highly effective. These two procedures are effective enough to bring about favorable results to eradicate the error code 0xc1900200.

Procedure 1: Inspect the Basic Requirements for the Update

Firstly, it is essential to check if the system fulfills the minimum requirements for downloading the Windows update. For this, you must proceed to launch the official website of Microsoft. There, locate the option that says “Get the Anniversary Update now”. After that, a file begins downloading. Next, after the download, proceed to run it which triggers the Update assistant to begin.

This launches a window bearing an “Update now” option. If you click it, you receive a compatibility report. In case of any problem, the section which is incompatible with the Windows 10 will be determined. However, if all the indicators flash green checkmarks, the indication may be that the system partition may be small.

This prior inspection makes you sure if you can proceed with the Windows update or not. If you skip this, and the system happens to be devoid of those necessities, the error code 0xc1900200 appears before you during the installation process. However, if you note that all the basic requirements are fulfilled, but yet you receive the error, then move to the next procedure.

Procedure 2: Enhance the System Partition Size

The system partition, basically, is a storage space present on the hard disk. It needs sufficient free space mainly for shifting files whilst the installation process. However, in certain scenarios, the system partition tends to become full of earlier or obsolete log files. Now, to enhance System Partition go through the steps mentioned below:

To do this, press and hold down the Windows, as well as, the R key. This brings up the Run dialog box, and therein, you must type “diskmgmt.msc” after which you must hit the Enter key. Then, hit the “C:/ Drive” and locate the Partition Map. The initial one is a 100MB partition and you must right-click on it in order to select the “Change Drive Letter and Paths”.

Now, once you are done, proceed to click on the Start and type in “cmd” in the search box. The Command Prompt comes up in the search results, but do not click on it. First, right-click on it and choose the option “Run as Administrator”. Now, once the Command Prompt launches, proceed to type the following command. First, type “Y” and then proceed to hit the Enter button. After that, type the underlying commands:

Commands:

The commands are given in the exact order, try not to skip the lines:

  • takeown /f . /r /d y
  • icacls . /grant administrators:F /t <see note below>
  • attrib -h -s -r bootmgr

Doing this eradicates the error code 0xc1900200 comprehensively. However, for the “icacls” command, employ your username. You can locate by typing is the Command Prompt window, “whoami”. Now, once it gets complete, press and hold down the Windows key and proceed to launch the “Y: Drive”. For this, make sure that the hidden files, as well as folders, are arranged to display.

Head to the Boot folder and proceed to remove all the languages except en-US by pressing Shift+Delete. After that, empty the recycle bin as well. However, then in the window of Command Prompt, proceed to type the following:

Commands:

The commands are given in the exact order, try not to skip the lines:

  • On Windows 8 and above including 10: chkdsk Y: /F /X /sdcleanup /L:5000
  • On Windows 7: chkdsk Y: /F /X /L:5000

This tends to reduce the NTFS log to 5MB and tends to leave behind ample space for the installation to process. Now, you can move on to initiate the installation process. However, after the completion of the installation process, the users can revert back to the “diskmgmt.msc” and then eradicate the drive letter for the purpose of boot partitioning.

Wrapping up…

The Windows 10 error 0xc1900200 is one of the most frequent problems that most users encounter. Any problem bars the regular functioning and processing of various tasks which eventually troubles the users. Our advice is that you try the procedures to solve and troubleshoot the error completely with no extra investment. However, if nothing brings up the results that you want, make sure to consult an expert.

Related posts

No Sound On Youtube Videos? 7 Easy Methods To Bring Sound Back

Nathaniel J. Villa

System Idle Process High CPU Windows 7 | Learn Effective Techniques

Nathaniel J. Villa

Wifi Doesn’t Have A Valid IP Configuration Windows 10- Get Instant Solution

Nathaniel J. Villa